2023 Ivoclar Vivadent Programat CS4

Ivoclar Vivadent Programat CS4

A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.

Ivoclar Vivadent Programat CS4 Advantages:

• Fast sintering of IPS e.max ZirCAD
• Crystallisation of IPS e.max CAD
• Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
• High processing capacity (up to six units)
• Open system
• Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
• Power Saving Technology
• Compact design
• Possibility of on-site temperature calibration
• OSD (Optical Status Display)
• Remote control via PC/laptop by means of PrograBase3 software

Ivoclar Vivadent Programat CS4 Key features

• The firing chamber can be heated up to 1600 ° C;
• The electronics with the corresponding software controls the sintering program;
• There is a constant comparison between the actual and the set temperature;
• The sintering table can accommodate up to 6 single restorations at the same time

Ivoclar Vivadent Programat CS4 Features of the model

• Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
• Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
• Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).

Ivoclar Vivadent Programat CS4 Application

• Sintering and glazing of ZrO ₂ materials (eg IPS e.max ZirCAD);
• Crystallization and glazing (e.g. IPS e.max CAD).
• The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.

Specifications

• Power supply: 118-240 V / 50-60 Hz
• Overvoltage category: II
• Pollution degree: 2
• Allowable voltage fluctuations: + – 10%
• Maximum current consumption: 16A @ 118V, 8A @ 240V
• Electrical fuses: 250 V / T 16 A (heating element)
• Fuse size: diameter 5 x 20 mm
• Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
• Useful chamber volume: diameter – 80 mm, height – 80 mm
• Maximum firing temperature: 1600 ° C
• Weight: bottom 10 kg, furnace head 17 kg

Equipment

• The lower part of the oven is electronically controlled;
• Furnace head with sintering chamber;
• Sintering table;
• Object stand;
• Network cable;
• Table fork;
• Cleaning brush;
• Crystallization table.

Delivery forms

• Programat CS4
• Power cord
• Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
• Sinter tray
• Sinter tray fork
• IPS e.max Speed Crystallization Tray
• USB download cable
• var. accessories
• Instructions for Use
• Warranty Card