Canon RK-F2 Auto Refractor Keratometer

$6,000.00

In stock

The compact and lightweight RK-F2 with its fully automatic alignment and measurement system, takes ophthalmic examination to a new dimension of simplification, in just one step.

CANON RK-F2 AUTO REFRACTOR KERATOMETER

 

The RK-F2 automatically aligns, acquires the readings and then moves over to the opposite eye to perform the same function using the Full Auto mode. Alignment may also be performed using the Auto setting, where only one eye is automatically examined, or using the Manual setting. If the pupils have a diameter as small as 2 mm, readings may still be acquired using the small pupil mode. Up to 10 measurements of Refractometry and Keratometry may be stored for each eye.

SMALL PUPIL SIZE
At 2.0 mm, the small pupil mode helps contribute to an efficient screening and is useful when a patient’s pupils are difficult to dilate. The short reaching distance between the patient and operator allows closer personal interaction and easy access to the patient’s eyes.
RETRO-ILLUMINATION
Using infrared retro-illumination, the RK-F2 Ref-Keratometer provides a detailed view of the eye which is helpful for identifying cataracts, vitreous opacity, scars, and other serious eye problems.

CORNEAL PERIPHERY MEASUREMENT
The peripheral keratometry mode provides accurate measurements for examining oblique astigmatisms and helps determine the best fit for a contact lens. The RK-F2 Ref-Keratometer can be used to make a series of measurements at a 30 degree angle from the eye’s center along the attentive meridians. WIDE MEASUREMENT RANGE The dioptric measurement range of -30D to 22D allows examination of strong myopia or hyperopia. The astigmatic measurement range extends from 0 to 10D. The radius of curvature extends from 5 to 10 mm (33.75D to 67.5D) for keratometry.

MOTORIZED OMNI-DIRECTIONAL JOYSTICK
Aligning the patient’s eye is easy using the motorized omni-directional joystick with a fine focus dial. All positioning may be performed with one hand allowing the other hand to work with the patient, if needed. The top of the joystick button has the start button which can immediately be pressed once the patient is properly positioned.
BUILT-IN PRINTER
The front-loaded, high speed built-in printer includes an auto cutter making it simple to remove the print-out. The ECO setting reduces the printing density and thereby conserves the paper necessary for printing by up to 50% as compared to printing without using the ECO setting.

Features

  • Selectable Measurement Modes
  • Small Pupil Size
  • Retro-Illumination
  • Corneal Periphery Measurement
  • Wide Measurement Range
  • Compact and Lightweight
  • Multi-Functional Color LCD Monitor
  • Motorized Omni-Directional Joystick
  • Built-In Printer

Specifications

Type Full Auto Ref-Keratometer
Alignment Mode Full Auto/Auto/Manual
Auto Function Auto Shoot
Fixation Target Internal fixation/ Automatic fogging system
Corneal Pupil Diameter 2 to 16 mm
Retro-Illumination 2 images may be stored in memory
Data Memory Maximum 10 measurements of REF and KER for each eye
Interface RS-232C, USB Host, LAN
Display Tilting 5.7 inch VGA color TFT LCD screen
Operation Range Front/Back: 40 mm
Left/Right: 90 mm
Up/Down: 30 mm
Built-In Printer Thermal line printer with easy loading and auto cutter
Chin Rest Up/Down: 60 mm (Electrical)
Joystick Single-Axis (Electrical)
Refractometry
Sphere (SPH) -30 to +22 D (when Vertex distance of 12 mm)
Cylinder (CYL) 0 to ±10D (Increments: 0.12D and 0.25D)
Axis (AX) 1° to 180°
(Increments: 1 mm)
Pupil Distance (PD) 30 to 88 mm
Minimum Pupil Size 2 mm
Keratometry
Radius of Curvature 5 to 10 mm (Increments: 0.01 mm)
Corneal Power 33.75 to 67.5D (When cornea equivalent refractive index is 1.3375)
Corneal  Astigmatism 0 to -15D
Axis 1° to 180° (Increments: 1 mm)
Corneal Periphery Measurement area: 30° (When radius of curvature is 8 mm)
Corneal Diameter 2 to 14 mm
Electrical and Environmental
Power Saving System Available
Power Supply 100-240V 50/60Hz
Power Consumption 80VA
Physical Characteristics
Dimensions (W x L x H) Approximately 10.2 x 19.3 x 18.5 inches
(260 x 490 x 470 mm)
Weight Approximately 33 pounds (15 kg)

 

Be the first to review “Canon RK-F2 Auto Refractor Keratometer”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu

CANON RK-F2 AUTO REFRACTOR KERATOMETER

Canon RK-F2 Auto Refractor Keratometer

$6,000.00

Add to Cart