Ivoclar Vivadent Programat CS4 Dental System

IVOCLAR VIVADENT INTRODUCES PROGRAMAT CS4

The new Programat CS4 furnace from Ivoclar Vivadent performs crystallization, sintering, and glazing.
Ivoclar Vivadent has announced the introduction of the new Programat CS4, a combination furnace for dental practices suitable for sintering zirconium oxide restorations, including IPS e.max ZirCAD. The compact furnace can also be used to crystallize and glaze CAD-processed lithium disilicate and other restorations, such as IPS e.max CAD and IPS Empress CAD. The Programat CS4 furnace is capable of speed-sintering zirconia and lithium disilicate materials.

Advantages:

• Fast sintering of IPS e.max ZirCAD
• Crystallization of IPS e.max CAD
• Glaze program for IPS e.max ZirCAD, IPS e.max CAD, and IPS Empress CAD
• High processing capacity (up to six units)
• Open system
• Simple and language-independent operation due to the proven combination of the membrane-sealed keypad and graphic display
• Power Saving Technology
• Compact design
• Possibility of on-site temperature calibration
• OSD (Optical Status Display)
• Remote control via PC/laptop by means of PrograBase3 software

Key features

• The firing chamber can be heated up to 1600 ° C;
• The electronics with the corresponding software controls the sintering program;
• There is a constant comparison between the actual and the set temperature;
• The sintering table can accommodate up to 6 single restorations at the same time

Features of the model

• Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
• Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
• Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).

Application

• Sintering and glazing of ZrO ₂ materials (eg IPS e.max ZirCAD);
• Crystallization and glazing (e.g. IPS e.max CAD).
• The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.

Specifications

• Power supply: 118-240 V / 50-60 Hz
• Overvoltage category: II
• Pollution degree: 2
• Allowable voltage fluctuations: + – 10%
• Maximum current consumption: 16A @ 118V, 8A @ 240V
• Electrical fuses: 250 V / T 16 A (heating element)
• Fuse size: diameter 5 x 20 mm
• Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
• Useful chamber volume: diameter – 80 mm, height – 80 mm
• Maximum firing temperature: 1600 ° C
• Weight: bottom 10 kg, furnace head 17 kg

Equipment

• The lower part of the oven is electronically controlled;
• Furnace head with sintering chamber;
• Sintering table;
• Object stand;
• Network cable;
• Table fork;
• Cleaning brush;
• Crystallization table.

Delivery forms

• Programat CS4
• Power cord
• Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
• Sinter tray
• Sinter tray fork
• IPS e.max Speed Crystallization Tray
• USB download cable
• var. accessories
• Instructions for Use
• Warranty Card