Dentsply Sirona CEREC SpeedFire For Sale

CEREC SpeedFire is the smallest and fastest sintering furnace on the market and can typically sinter a crown in 10 to 15 minutes. The advantages of full-contour zirconia can thus also be used for single visit chairside treatment.

Compatible with conventional cements – no bonding required
Finished CEREC zirconia restorations can be seated with conventional cements. That includes glass ionomer cements and resin cements – even popular products like Ivoclar Vivadent Monobond Plus and SpeedCEM, Doxa Ceramir, 3M RelyX and Dentsply Calibra.

Chairside application
Dentsply Sirona CEREC SpeedFire is capable of sintering a full-contour zirconia crown in 10 to 15 minutes, dependent upon size and volume. Designed for seamless integration into the CEREC workflow, the Dentsply Sirona  CEREC SpeedFire allows you to offer patients the strength of zirconia in a single visit. Simply design and mill restorations as usual, then sinter with CEREC SpeedFire. Finish with CEREC SpeedGlaze spray and the restoration is ready to seat.

Minimally Invasive
Requiring less reduction in tooth structure and a lower wall thickness, full contour restorations with zirconia provide ultimate strength and tooth preservation.

Perfect Fit
A pre-sintered state that’s 25% larger leads to extremely precise margins and occlusal surfaces.

Efficient and simple workflow
Just 4 steps to a full contour zirconium oxide restoration: scan, design, mill, sinter and glaze

CEREC SpeedFire Features:

• LED Status Indication
• Different colors indicate current status of process
• Induction TechnologySuperfast heating cycles
• Touch-Display
• Intuitive operation
• Intelligent Connectivity
• The CEREC software sends an order with all necessary information to the furnace
• SuperSpeed Chamber
• Carries up to 3 single crowns or one 3-unit bridge (max. length of 31 mm sintered)

Specifications:

Model designation : CEREC SpeedFire
Type of protection against electric shock : Protection Class I device
Degree of protection against ingress of water : Ordinary device (without protection against ingress of water)
Setup location : Indoors in dry area
Operating altitude : ≤ 2000 m above sea level
Temperature range : 5°C to 35°C (41°F to 95°F) Relative humidity max. 80%
Pollution degree : 2
Mode of operation : Continuous operation
Dimensions of unit (W x H x D in mm) : 250 x 425 x 425
Dimensions of packaged unit (W x H x D in mm) : 400 x 600 x 500
Furnace chamber : Diameter 38 mm x 20 mm height
Maximum sintering temperature : 1600°C (2912°F)
Approx. weight without packaging : 21 kg
Approx. weight including packaging : 30 kg
Rated line voltage : AC 100V – 240V
Rated power frequency : 50/60Hz
Admissible line voltage fluctuations : ±10% of nominal voltage
Power consumption: max. 1200 W Interfaces : 2x USB 2.0 1x LAN (RJ45) WLAN (optional via WLAN USB dongle)